Company news
Shining LED Sharpy Beam/ 5r Sharpy Beam/ 200W and 230W Beam Moving Head Light
Product Specification:
• Power input: 100-240V; 50/60Hz
• Power dissipation: 330W
• Lamp: Philips MSD Platinum 5R or 7R ( Color temperature: 8000K); Yodn Lamp 230W/Osram 230W; Osram 7R
• Channel mode: 16/20 DMX512 Channel
• Pan scan：540°(16bit) Electric correction
• Tilt scan：270° (16bit) Electric correction
• Amazing dot matrix, four tact switch, 180° turning show
• Color wheel: one color wheel, 14 kinds of color chips in one color wheel
• Gobo: 17 gobos
• Effect wheel: Rotation 8 prism, effect move, frost
• 0-100% mechanical dimming
• Strobe macro-control is available.
• Lens optical system mechanical force.
• Beam angle 0～4°
• Overheat protection
• IP level: IP20
• Magnetic ballast and AC/Dc power supply
• Product Size：523×337×511mm
• Packing Size: 635X440X725mm
• Net weight：20KG
Below are the characteristics of the 5r/7r beam 200w/230w beam moving head light.
First, Shining 200w/230w beam moving head light is very bright. Shining 5r beam moving head light uses high-end lens groups, not simple lenses or low-end lens group configurations. This lens group can make the brightness and life of the lens very excellent. Specifically, at a distance of 20 meters, the maximum brightness of the light spot can reach 72500 lumens. This brightness is first-class in the stage lighting industry.
Second, the Shining 200W and 230W beam lights use the default light bulbs to be turned on. The control of the light bulbs through the console effectively reduces the number of bulb starts and extends the life of the 5r/7r bulb. The latest anti-interference technology effectively avoids the console light. The signal interference caused by the power shock will not cause the uncontrolled movement of the moving head lights.
Third, due to the high efficiency of the light effect, the wick is very small. And the heat generation is very large, so the heat dissipation system needs to be very good. We have developed a multi-dimensional internal heat dissipation structure design to ensure the operating temperature range and improve product stability.
Fourth. software temperature control. Shining 200W and 230W beam moving head light have added fan speed monitoring to the software design. If the fan fails to rotate or ages due to bad conditions, the speed will be reduced. When the lamp's cooling requirements cannot be met, the lamp will automatically turn off to ensure the lamp Under the safety of the working environment, there will not be the situation where the universal light beam lamp is the most prone to burst bulbs!
Fifth, we have a unique blue screen design. You can directly check the operation of the lamp through the blue LCD screen. What's more outstanding is that the blue screen can be rotated to solve the problem that it is not easy to identify the inverted font of lamps. The most unique thing is that our lamp can set the initial zero point through the blue LCD screen, which solves the problem of zero-point confusion caused by vibration during transportation and other reasons, and there is no need to disassemble the lamp to reset.
Sixth, we use the wide power supply from 100V-240V universal, no need for additional regulators.
Seventh, The 8 facet prism has a remarkable effect, which can divide the light 8 beams.
Eighth, the Shining 5r beam is equipped with imported color plates. The beam moving head light uses Taiwan Baozhen Nano high-end color film to ensure extremely high color purity.
Ninth, we use the customized motor. The subdivision is 0.9 degrees. Most of the domestic are 1.8 degrees. Our leading professional motors can run steadily and more smoothly.
Tenth, the speed is super fast and the positioning is accurate, no matter how fast or slows the running lights are. Through the software program upgrade and the close cooperation of the stepper motor, it can also achieve the effect that other manufacturers can only achieve by using a three-phase motor! No step loss, accurate positioning! Shining 230w beam moving head X-axis from zero to the maximum travel, it takes 2.53 seconds, which is only 0.08 seconds slower than the X-axis of the Claypaky sharpy beam light; Y-axis is 1.32 seconds, which is only 0.02 seconds slower than the Claypaky sharpy beam moving head light.
Eleventh. stable performance and no burning board. Shining LED has been producing stage lighting for over 10 years. It has rich experience and unique design. So far, none of the lamps sold have a problem with the board, not to mention that those metal shells that are damaged.
We suggest that you can come to our company for an inspection or visit. Or demo orders are welcome to check their high quality. Place bigger orders if you are satisfied. We hope to communicate with you further for stage lighting products.
∷
