News
The Maintenance and Care of Stage Lighting Equipment in Nightclub
1. Check whether there are any problems in the lighting of each area before the opening of the day, whether it will affect the performance of the nightclub program, and deal with it in a timely manner.
2. Check the smoke machine every day to see if there is any smoke oil. The replacement of the smoke oil type is to clean the smoke oil box to avoid clogging the smoke pipe. It is also necessary to regularly clean the smoke box and the smoke machine without changing the smoke oil. , To ensure the service life and normal operation of the smoke machine, so as not to cause unnecessary losses.
3. Do not use the scanner immediately after turning it on. You need to wait 10 minutes before using it, because the built-in program of the scanner needs to be reset by self-test. Do not turn off the lamp immediately after turning it on, as this will cause great damage to the moving head light lamp and severely burn the bulb. Wait ten minutes or 20 minutes. Wait for the bulb and moving head light to cool down before turning on.
4. If the moving head light does not turn on, please check whether the light bulb is burnt out.
5. Regularly clean the sanitation of the stage lighting equipment, remove dust and debris, maintain the heat dissipation performance of the stage lighting equipment in nightclub, and maintain the lamp utilization rate. If you find that there is a lot of dust in the moving head lights, you can open the shell to clean it to avoid damage to the moving head lights.
6. Regularly perform sanitary cleaning on the lighting controller, like tiget touch, Pearl 2010, MA console. Keep the DMX lighting console clean and the utilization rate.
7. Protect VJ's computer, don't use any disk, otherwise it will be poisoned that day. You can watch the black screen at night!
8. Check whether the bulbs of pendant lamps, rain lamps and wall lamps are burnt out, and replace them in time.
9. Regular sanitary cleaning of the silicon box
∷
